Seal Coating Streets in Saint Paul

chip spreader, tanker truck

Seal coating is a street maintenance technique which preserves the condition of a street by sealing the surface and small cracks within the existing asphalt pavement. When this type of preventative maintenance is performed on a timely basis, a typical pavement may last 40 years before it needs to be reconstructed. 

Saint Paul’s residential streets are typically seal coated every eight years. Because of the heavier loads and higher traffic volume, arterial streets are milled and overlayed.

Seal coating involves applying hot liquid asphalt to a street surface and covering the street with a graded aggregate to produce a waterproof membrane.

During the summer months, several weeks before seal coating begins, the City's street maintenance division will work in the area to prep the streets, which can include pothole patching and/or some skim paving, which is putting down a thin layer of asphalt to patch a larger area of the street.

There are several steps to seal coating:

  • First, the street surface is swept clean of all loose pavement and dust.
  • Next, the surface of the asphalt is completely covered with a layer of liquid asphalt using a tank truck called a distributor.
  • Afterwards, a layer of gravel is placed over the liquid asphalt with a machine called a chip spreader.
  • Torpedo gravel (egg shaped) or crushed granite gravel chips are then worked into the asphalt with a rubber tire roller.
  • Traffic is allowed back on the street within several minutes of placing and compacting the gravel, as the weight of vehicles helps to work the gravel into the soft asphalt.
  • The gravel chips are left on the street for several days to allow cars to help crush the gravel into the cracks. Please drive and travel carefully when the streets are covered with loose gravel.
  • Finally, the streets are swept to pick up any loose gravel.
  • Recovered gravel is screened and re-used for the next seal coating project.

Check out our seal coating video to learn more about the process.

2023 Seal Coating - Postponed

Seal coating has been postponed in 2023. Saint Paul Public Works is "route patching" the entire city to repair extensive road damage caused by record-setting winter weather.

Public Works will review and patch all streets, and then go back and skim pave streets in areas that need more extensive work. Crews are expected to patch or skim pave all 530 miles of residential streets and more than 2,000 alleys throughout Saint Paul this summer and into the fall. 

Historically, approximately one-eighth of the City is typically seal coated each year. Residential streets and paved alleys are prepped in July and seal coated in August. 

View the 2015-2021 seal coating map. Please note that some of the 2021 area was postponed and will be the next area to be seal coated.

Last Edited: July 5, 2023